1 analog 1310nm laser diode module c-13-001a-p-sxxxi/xxx-x-xx 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 lumnds529-nov2405 rev. a. 1 luminentoic.com parameter symbol min typical max unit test condition threshold current i th - 10 20 ma cw operating current i op - 30 45 ma cw optical output power h 2 p f 1 2 - - 2 - mw cw, i th + 20 ma , kink free operating voltage p f - 1.2 1.5 v cw, p f =p f (min) center wavelength c 1290 1310 1330 nm cw, p f =p f (min) spectral width (rms) ? - - 3 nm cw, p f =p f (min) slope ef? ciency h s e 0.05 - 0.1 mw/ma cw, p f =p f (min) 2 0.1 - - optical isolation oi 45 - - db 30 - - -40oc 2 analog 1310nm laser diode module c-13-001a-p-sxxxi/xxx-x-xx 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 lumnds529-nov2405 rev. a. 1 luminentoic.com pin assignment packaging dimensions " ": fl angel es s ld module- pigtailed units in mm part number: c-13-001a-p-sxxxi/xxx-x- xx
important notice! all information contained in this document is subject to change without notice, at luminents sole and absolute discretion. luminent warrants performance of its products to current specifications only in accordance with the companys standard one-year war - ranty; however, specifications designated as preliminary are given to describe components only, and luminent expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fit - ness for a particular purpose, and non-infringement of proprietary rights. please refer to the companys terms and conditions of sale for further warranty information. luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of pat - ents, services, or intellectual property described herein. no license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and luminent makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. luminent customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify luminent for any damages resulting from such use or sale. the information contained in this document is provided on an as is basis. customer agrees that luminent is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. customer must contact lumi - nent to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. ? luminent, inc. 2005 all rights reserved handling precautions: this device is susceptible to damage as a result of electrostatic discharge (esd). a static free environment is highly recommended. follow guidelines according to proper esd procedures. laser safety: radiation emitted by laser devices can be dangerous to human eyes. avoid eye exposure to direct or indirect radiation. 3 analog 1310nm laser diode module c-13-001a-p-sxxxi/xxx-x-xx lumnds529-nov2405 rev. a. 1 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 luminentoic.com ordering information c-13-001a-px-sxxxi/xxx-x-xx fiber output power pin assignment "-" =a type package p=pigtail 13=1310nm wavelength analog h&2 connector "i" = isolator fc/st/sc/mu/lc/- apc = apc fiber " - " = pc fiber flange type (-;o;v;k) rohs compliant blank = rohs non-compliant product gr = full rohs compliant product (no exemption) g5 = rohs 5/6-compliant product (lead exemption) -/g5/gr
|
